- Preparation of Metal Injection Molded Dental Components using Spheroidized Ti Powders by Plasma Process
-
Ji-Na Gwak, Sangsun Yang, Jung-Yeul Yun, Ju-Yong Kim, Seongjin Park, Hyun-Seung Kim, Yong-Jin Kim, Yong-Ho Park
-
J Powder Mater. 2013;20(6):467-473.
-
DOI: https://doi.org/10.4150/KPMI.2013.20.6.467
-
-
33
View
-
0
Download
-
2
Citations
-
 Abstract
 PDF
- This research presents a preparation method of dental components by metal injection molding process (MIM process) using titanium scrap. About 20µm sized spherical titanium powders for MIM process were successfully prepared by a novel dehydrogenation and spheroidization method using in-situ radio frequency thermal plasma treatment. The effects of MIM process parameters on the mechanical and biological properties of dental components were investigated and the optimum condition was obtained. After sintering at 1250°C for 1 hour in vacuum, the hardness and the tensile strength of MIMed titanium components were 289 Hv and 584 MPa, respectively. Prepared titanium dental components were not cytotoxic and they showed a good cell proliferation property.
-
Citations
Citations to this article as recorded by  - Effect of Heat Treatment Temperature and Atmosphere on the Microstructure of TiH2-WO3 Powder Mixtures
Han-Eol Lee, Yeon Su Kim, Sung-Tag Oh
Journal of Korean Powder Metallurgy Institute.2017; 24(1): 41. CrossRef - Characterization Of The Graded Microstructure In Powder Sintered Porous Titanium
J.-J. Oak, J.I. Bang, K.-C. Bae, Y.H. Kim, Y.-C. Lee, H.H. Chun, Y.H. Park
Archives of Metallurgy and Materials.2015; 60(2): 1265. CrossRef
|
kpmi
